Removing
1. Remove the lower engine protection.
2. Unscrew and remove bearing cap 1 together with oil guides 2 and 3 (see fig.6.17). Lubricate bolts 4 with Loctite 574 sealant (for engines 111) or Loctite 243 Adhesive (for engines 601 and 611).
Pic. 6.17. Bearing caps:
1. Outer cover,
2. Drive shaft oil guide,
3. Output shaft oil guide,
4. Bolt.
3. Remove oil guides 2 and 3 from cover 1. Lugs of guides 2 and 3 must engage with notches (arrows) in lid 1.
4. Wipe the sealing surfaces. Lubricate the sealing surfaces of the cover 1 with sealant.