Inductive sensor of rotation speed of the turbine of the GTR (cars with engines 111, 601 and 611.980)
Removal
1. Remove the automatic transmission pan.
2. Unscrew bolt 1 (see figure 6.63).
Figure 6.63. Inductive sensor of the rotation speed of the gas turbine (cars with engines 111, 601 and 611.980):
1. Bolt,
B92. Turbocharger speed sensor,
3. B92.1. Wiring connector.
3. Remove the B92 sensor and disconnect the B92.1 wiring connector. Lift the pin (arrow) with a screwdriver until the B92.1 connector is completely disconnected.
Installation
4. Installation is carried out in the reverse order of removal.
Inductive sensor of rotation speed of the turbine of the GTR (cars with engine 104.900)
Removal
1. Disconnect the negative cable from the battery.
2. Disconnect the wiring connector 4 (see figure 6.64).
Figure 6.64. Inductive sensor of rotation speed of the gas turbine (cars with engine 104.900):
1. Bolt,
2. Turbine speed sensor,
3. Sealing ring,
4. Wiring connector.
3. Unscrew bolt 1 securing sensor 2 and remove it.
Installation
4. Installation is carried out in the reverse order of removal.