Contents: Removal ↡ Installation ↡
Removal
1. Remove starter M1 (figure 3.7).
2. Remove flywheel 10.
3. Remove all fasteners attached to the timing belt cover 2.
4. Remove the crankshaft position sensor B15.
Publication taken from an online resource [MercedesMAN]
5. Unscrew bolts 7 securing pan 8 to timing belt cover 2. One bolt 7 is shorter than the others, starting with engine number 004313 and up to number 004449.
6. Loosen bolts 7 securing pan 8 and lower pan 8.
7. Remove the timing belt cover 2.
8. Replace the radial oil seal 9.
Installation
9. Installation is carried out in the reverse order of removal.
Figure 3.7. Timing belt cover: 1, 7 - Bolts; 2 - Timing belt cover; 3 - Shear head bolt; 4 - Bracket; 5 - Guide pins; 7 - Pallet; 8 - Radial oil seal; 10 - Flywheel.