Contents: Removal ↡ Installation ↡
Removal
1. Remove compressed air supply pipe 2 (figure 3.2).
2. Disconnect the inlet pipe 1 from the air filter housing 9.
3. Disconnect the intake pipe 1 from the engine.
Installation
4. Installation is carried out in the reverse order of removal.
Figure 3.2. Inlet pipe: 1 - Inlet pipe; 2 - Compressed air supply pipe; 3 - Gasket; 4, 5, 6, 7- Bolts; 8 - Compressed air supply pipe; 9 - Air filter housing.