Contents: Removal ↡ Installation ↡
Removal
1. Drain the coolant.
2. Remove filter element 1 (figure 2.68).
3. Disconnect the wiring connector from the oil pressure sensor 14.
4. Unscrew bolts 12 and 13.
5. Remove radiator 3 together with the filter housing.
6. Unscrew bolts 11 securing the radiator to filter housing 2.
(Read more on the website: MercedesMan.ru)
7. Disconnect filter housing 2 from radiator 6. Replace sealing rings 9, 10 and 14.
Installation
8. Installation is carried out in the reverse order of removal.
Figure 2.68. Oil filter housing: 1 - Filter element; 2 - Oil filter housing; 3 - Oil radiator; 4 - Gasket; 6, 7 - Branch pipes; 8, 9, 10, 14 - Sealing rings; 11, 12, 13 - Bolts; 14 - Oil pressure sensor wiring connector.