Contents: Removal ↡ Installation ↡
Removal
1. Disconnect the negative cable from the battery.
2. Unscrew nut 1 and remove it together with washer 2 (figure 2.85).
3. Disconnect wires 3 and 4.
4. Remove cover 5.
5. Unscrew nut 6 and remove wire 7.
6. Unscrew bolts 10 and remove starter 9.
Installation
7. Installation is carried out in the reverse order of removal.
Figure 2.85. Starter: 1.6- Nuts; 2 - Washer; 3, 4 - Wire (terminal 30); 5 - Lid; 7 - Wire (terminal 50); 8 - Starter solenoid relay; 9 - Starter; 10 - Mounting bolts.