Removing
Details of installation of the switch of blocking of a starter
5 - Retainer; 6, 10 - Bolts; 7 - Nut; 8 - Contact connector for electrical wiring; 9 - Switching rod; 52 - Gearshift lever; 54 - Drive lever; S16/4 - Starter lock switch
1. Disconnect the electrical wiring from the sensor-switch (8).
2. Unhook the pull (9), by unfastening the latch (5).
3. Disconnect the shift lever (52), by unscrewing the nut (7) and bolt (6).
4. Remove the starter interlock switch (S16/4), by loosening the bolts (10).
Installation
Installation is carried out in the reverse order of removal.