Contents: Removal ↡ Installation ↡
Removal
1. Remove the tray.
2. Unscrew the pump bracket 6 from the pump 3 (figure 2.67).
3. Unscrew the oil pump pulley 4.
4. Unscrew bolts 5.
5. Remove the oil pump 3.
Installation
6. Installation is carried out in the reverse order of removal. Wipe the bracket 6 of the pump 1. Fill the pump with oil before installation to facilitate engine starting.
Figure 2.67. Oil pump: 1 - Oil pump drive chain; 2 - Keyway bushings; 3 - Oil pump; 4 - Pump pulley; 5 — Mounting bolts; 6 - Oil pump mounting bracket; 7 - Bolt with gasket.