1. Check the fluid level in the expansion tank.
Note: If the brake fluid level is between the MAX and MIN marks, the expansion tank is filled correctly.
Caution: Add brake fluid only when the brake fluid level drops below the MIN mark.
Attention: if the brake fluid level has dropped below the MIN mark, the brake system and clutch drive system must be checked for leaks:
- in this case, all tanks, devices, shock absorbers, covers, cuffs, and caps are checked.
2. Correct the fluid level (brake fluid (DOT 4 plus).
Power steering (PS)
1. Remove the expansion tank cap (1).
2. Check the oil level. To do this, wipe the oil dipstick with a rag, put the cover with the dipstick back in place, screw it all the way in, unscrew it again and determine the oil level.
The supply tank is filled correctly if the oil at a temperature of approximately 20°C is between the MIN and MAX marks.
3. Tighten the shut-off cap on the feed tank.
