1. Unscrew the cover (2) (pic. VN 1.003).
2. Check the coolant level.
Attention: The coolant level should only be checked and corrected when the coolant temperature is below 50°C.
The cooling system is filled correctly if the coolant level is between the MAX and MIN·marks.
3. Check the concentration of antifreeze.
If the concentration of antifreeze is low, then it should be corrected.
4. Correct coolant level
Attention: coolant should only be used in the correct proportions of the components (see table).
5. Install cover (2).
Coolant filling volumes
Without PR code H13 or code HZ7 | With PR code H13 or code HZ7 | |
Total filling volume | 8.6 l | 10.5l |
Filling volume of antifreeze with anticorrosion additives up to -37°С | 4.3 l | 5.3 l |
Antifreeze concentrate up to -45°С | 4.7l | 5.8 l |