Additional or time-interval dependent maintenance work is not displayed on the multifunction display. They must be completed in due time, either additionally or separately. Upon completion of maintenance work, it is necessary to reset the service computer readings.
Maintenance instructions
The scope of maintenance work should be selected from the relevant current service sheet, and the content of individual maintenance work operations should be selected from "Service Manuals".
Additional maintenance work and time-dependent maintenance work are indicated at the end of the service sheet. They must be agreed with the client and marked with a cross in the heading on the first page:
- additional work for every 3rd engine oil change,
- additional work during each maintenance,
- additional work at every 2nd maintenance,
- additional work at every 6th maintenance,
- maintenance work every 6 years,
- maintenance work every 4 years,
- maintenance work every 10 years,
- maintenance work every 15 years or every 250,000 km.
The performance of individual maintenance operations should be marked in the service sheet with a cross in the fields before the names of the work. In the fields after the names of the works, the presence of faults within the given scope of works should be marked with a cross upon acceptance of the vehicle. The mechanic performing the work confirms this with his signature in the header of the service sheet.
(Article was borrowed from the website: MERCEDESMAN)