Depending on the mileage, the service interval is shown as the number of kilometers to service or as the number of days remaining until service. When showing the period in days, the symbol is additionally displayed.
If maintenance has not been completed within the required time, then when the ignition is switched on, the message on the panel flashes, and a minus sign is displayed in front of it.
You can close the maintenance period information by clicking the button. After 10 seconds of indication, this information closes itself.
Maintenance due dates can be manually called up on the display.
1. Activate the display.
2. Press the button twice within one second. The display will show the service symbol and the remaining mileage in kilometers or days.
3. Press the button to exit the due date display mode. Mode switching is also carried out independently after 10 seconds.
The amount of mileage until the next maintenance of the car depends on the style of driving.
Gentle driving mode with medium engine speeds without trips for short distances, when the engine does not have time to warm up to operating temperature, increases the mileage / period until the next service.
Attention! If the vehicle was parked with the battery disconnected, the time spent in the parking lot is not taken into account. The period of parking of the car should be taken into account if the system shows the occurrence of maintenance in days, and not in kilometers.