Removing
1. Remove the flywheel.
2. Check for leaks.
3. Remove bolts 1 and 5 (see fig. 2.31).
Pic. 2.31. Crankshaft rear oil seal cover:
1. Bolt with gasket,
2. Oil seal,
3. Cover,
4. Guide pins,
5. Bolts,
6, 7. Additional installation tools.
4. Press out the rear oil seal cover 3 and oil seal 2 (arrows). Do not damage the pan gasket.
5. Check up a condition of an epiploon of a cranked shaft 2. If necessary replace it.
Installation
6. Installation is made in an order, the return to removal.