Except for models with special protection (code 979)
Rear Ventilation Shield Installation Details
1. Remove the protective cover (1) of the rear pillar trim panel (2).
2. Remove the trim panel (2).
3. If equipped, disconnect the reverse alarm buzzer (BA) wiring harness (only for right ventilation shield).
Original article is on the portal: www.mercedesman.ru
4. Remove the rear side trim panel (see Chapter Body).
5. Loosen the clamp (3) and disconnect the hose (4).
6. Remove the spring retainer (5) and ventilation casing (6).
7. Remove the cover (7), sealing element (8) and molding (9).
8. Installation is carried out in reverse order.