Contents: Removal ↡ Installation ↡
Removal
1. Remove the front part of the exhaust system 5 (see figure 2.5).
Figure 2.5. Exhaust manifold:
1. Gasket,
2. Exhaust manifold,
3, 4. Nut,
5. Front part of the exhaust system,
6. Bolt,
7. Hairpin.
2. Unscrew the nuts 3 and disconnect the exhaust manifold 2 from the cylinder head together with the gasket 1.
[Material based on data from the portal: MercedesMan]
3. Check studs 7 and replace them if necessary.
Installation
4. Installation is carried out in the reverse order of removal. Replace gasket 1. Replace nuts 3 and tighten them starting from the center.