Removing
1. Turn off the ignition.
2. Disconnect the air inlet pipe 1 from the air filter cover 2 (see fig. 2.2).
Pic. 2.2. Air filter:
1. Air inlet pipe,
2. Air filter cover,
3. Filter element,
4. The bottom of the air filter housing,
5. Air inlet sleeve,
6. Rubber retainer.
3. Remove filter element 3.
4. Disconnect the air inlet sleeve 5 from the bottom of the filter housing 4.
5. Remove the rubber retainer 6 from the bottom of the filter housing 4.
6. Remove the lower part of the filter housing 4.
Installation
7. Installation is made in an order, the return to removal. When installing, insert the fixing supports (arrows) the lower part of the body 4 on the supporting surface.