Contents: Removal ↡ Installation ↡
Removal
1. Remove the intake manifold 1 (see figure 3.8).
Figure 3.8. Cylinder head cover:
1. Intake manifold,
2. Cylinder head cover,
3. Nut,
4. Bolt,
5. Cylinder head,
6. Gasket.
2. Unscrew the exhaust gas recirculation valve mounting nut from the cylinder head.
3. Unscrew nuts 3 and bolts 4 securing cylinder head 2 to cylinder head 5.
4. Remove the cylinder head cover 2.
Installation
5. Installation is carried out in the reverse order of removal.