Contents: Removal ↡ Installation ↡
Removal
1. Turn off the ignition.
2. Remove the cover on box 1 (see figure 3.50).
Figure 3.50. Engine crankshaft speed sensor:
1. Box with connectors,
2. Wiring connector,
3. Crankshaft speed sensor,
4. Sensor wiring,
5. Bolt.
3. Disconnect connector 2 of speed sensor 3.
Text republished from the website [MercedesMAN.ru]
4. Disconnect wire 4 from speed sensor 3. Make sure the wire is not damaged.
5. Unscrew bolt 5 securing the speed sensor 3.
6. Remove the speed sensor 3.
Installation
7. Installation is carried out in the reverse order of removal.