CKP Sensor Installation Details (L5) 111 series engine
CKP Sensor Installation Details (L5) 112 and 113 series engines
1. The details of installing the CKP sensor of gasoline engines are shown in the illustrations, if necessary, remove the air cleaner.
2. After replacing the CKP sensor, it is necessary to reinitialize the control module using special diagnostic equipment - it is most reasonable to entrust this procedure to car service specialists.
Diesel models
612 Series Engine CKP Sensor Installation Details
1 - Pin connector
2 - Bolt
L5 - CKP sensor
1. The installation details of the 612 series diesel CKP sensor are shown in the illustration, to which all references in the text refer
2. Jack up the car and put it on stands.
3. Remove the bottom section of the soundproofing.
4. Disconnect the connector (1).
5. Turn out a fixing bolt (2) and remove the CKP sensor (L5).
6. Installation is carried out in the reverse order.