Recommended lubricants and fluids Attention! Keep children away from operational materials - if they enter the body of a child, immediately consult a doctor! Note. Only use materials recommended by...
Active Scheduled Maintenance Alert System (ASSYST) Scheduled maintenance indicator (THAT) Note. The scheduled maintenance due date indicator informs about the OPTIMAL maintenance period and its readings are not related...
Schedule of ongoing maintenance Engine compartment of petrol models (using the ML 320 as an example) (1 of 2) Engine compartment of petrol models (using the ML 320 as an example) (2 of 2) 1 - Oil...
General information about settings Term «setting» is used in this manual to refer to a set of procedures rather than a single procedure. If the routine maintenance schedule is strictly adhered to from the...
Checking fluid levels, leak control Note. The following procedure describes the procedures performed on a monthly basis. For other fluid level checks, see the appropriate Service Specific Sections below....
Changing the engine oil and oil filter Attention! Prolonged skin contact with used engine oil is quite dangerous. Use barrier cream and wear gloves during this procedure. Change oil-soaked clothing...
Checking the brake system Warning! Dust resulting from wear on the linings and accumulating on brake components may contain asbestos that is hazardous to health. Do not blow this dust out with...
Checking the power system, replacing the fuel filter Warning! Gasoline is highly flammable, so special precautions must be taken when working on any component of the fuel system! Do not smoke, and do not approach the work...
Visual check of tightness of automatic transmission Note. Oil in AT does not need to be changed during the entire period of operation. 1. The most likely places for the development of ATF leaks include the following: The...
Checking the condition of the anthers of the drive shafts 1. Anthers of drive shafts are very important elements, because. they protect the constant velocity joints (SHRUS) against dirt, water and other foreign objects causing...
Checking the air conditioning system Attention! The air conditioning system is under high pressure. Do not attempt to loosen any connections or remove parts of the system without first discharging the...
Lubrication of door stops and lock cylinders 1. Periodically lubricate door stops and hinges with Optimol-Optitemp TT 1. 2. Lubricate the door lock cylinders. Insert and remove the key several times.
Visual inspection of the seat belt and airbag unit 1. Pull out the seat belt fully and check the webbing for broken threads). Check the belt webbing for damaged threads 2. Damage can be caused by, for example, a pinched...
Checking the headlights and horn 1. Turn on the ignition and check the operation of all external lighting devices. 2. With the help of an assistant or by driving the car in reverse against a wall, check...
Checking the condition and replacing the wiper blades 1. Road film builds up on the wiper blades over time, reducing their effectiveness, so the wiper blades should be washed regularly in a mild cleaning solution. 2. Wiper...
Cabin filter replacement 1. Remove the lower cover installed on the right under the instrument panel (see chapter Body ). The cabin air filter is located under the right lower cover of the...
Brake Fluid Replacement Attention! Do not reuse used brake fluid! Old brake fluid is much darker than fresh. This makes them easy to distinguish. Do not dispose of brake fluid with household...