Gasoline car engine Mercedes M-Class (W163)

Engine specifications
Note: The parameters used when performing the procedures described in this Chapter are listed below. Detailed standard information can be obtained from authorized...

Checking the compression pressure in the cylinders
Note: An assistant will be required to perform the compression pressure test procedure. 1. Compression gives an idea of the engine's condition. The results of the test...

Checking the engine with a vacuum gauge
Basic positions and fluctuations of the vacuum gauge needle when diagnosing engine faults Using a vacuum gauge, you can get information about the condition of the engine...

Replacement of the auxiliary drive belt and elements of its tensioning mechanism
Accessory Drive Belt Installation Details on Models Equipped with 111 Series Engine 1. The accessory drive belt installation details on models equipped with the 111...

Removal and installation the engine
Preparing to remove the 111 series engine (1 of 4) Preparing to remove the 111 series engine (2 of 4) Preparing to remove the 111 series engine (3 of 4) Preparing to...

Removal and installation timing belt covers
Front Cylinder Head Cover Installation Details (111 series engines) 1. The installation details of the 111 series engine front cylinder head cover are shown in the...

Replacing the timing chain
Replacing the timing chain on a 111 series engine Illustrative material on replacing the timing chain for the 111 series engine is presented in the illustration, to...

Removal and installation of timing drive components
Crankshaft Sprocket Installation Details for Series 111 Engine Details of the installation of the chain guide on the cylinder head of the 111 series engine M111...

Setting the base position of the camshafts
Checking the basic position of the camshafts of the 111 series engine 1. Illustrative material for checking the basic position of the camshafts of the 111 series engine...

Checking the balance shaft base position (112 series engines only)
Checking the basic position of the balance shaft (112 series engines) 1. Illustrative material for checking the basic position of the balance shaft on 112 series engines...

Removal and installation of timing components
Note: The bolts securing the camshaft sprockets must be replaced without fail. Camshaft adjuster 111 Series Engine Camshaft Adjuster Installation Details (1 of 2) 111...

Removal and installation the cylinder head
Preparing to remove the cylinder head of the 111 series engine Removal the cylinder head of the 111 series engine 1. Illustrative material on the removal and...

Removal and installation the intake manifold
111 Series Engine Intake Manifold Installation Details 19 - Inlet manifold; 19/1 - Mounting bolt; 19/2 - Fastening nut; 19/3 - Sealing gaskets; 32/4 - Connecting rod;...

Removal and installation the exhaust manifold
111 Series Engine Exhaust Manifold Installation Details 1. The installation details of the 111 series engine exhaust manifold are shown in the illustration to which all...

Removal and installation the end cover, replacing the rear crankshaft oil seal
111 Series Engine End Cover Installation Details 1. The installation details of the 111 Series engine end cover are shown in the illustration to which all references in...

Removal and installation the torsional vibration damper / drive belt pulley
111 Series Engine Torsional Vibration Damper/Drive Belt Pulley Installation Details 1. The 111 Series Engine Torsion Damper/Drive Belt Pulley installation details are...

Removal and installation the flywheel/drive disc
Flywheel/Drive Plate Installation Details on 111 Series Engine 1. The flywheel/drive plate installation details on the 111 Series engine are shown in the illustration to...

Removal and installation the powertrain suspension supports
Rear Powertrain Suspension Support Installation Details (all models) 1. The details of the installation of the rear support of the power unit suspension on models...

Maintenance of the lubrication system
111 Series Engine Oil Pan Installation Details 1. The details of the installation of the oil pan on the 111 series engine are shown in the illustration to which all...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More similar sections for repairing other models

☛ Power unit: Petrol engine V6 car Mercedes 190 (W201) (1982-1993)
☛ Power unit: Petrol engine V12 car Mercedes W140 (1991-1998)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code

W163 (1997-2005)