Contents: Removal ↡ Installation ↡
Removal
1. Remove the intake manifold 1 (see figure 3.54).
Figure 3.54. Injectors:
1. Intake manifold,
2. Wiring connector,
3. Bolt,
4. Bracket for mounting injectors,
5. Nozzle,
6. Seals,
7. Gasket.
2. Remove the wiring connectors 2 from the injectors.
(Original can be found on the website MercedesMan)
3. Unscrew bolts 3 securing the injector mounting bracket 4 in the intake manifold 1.
4. Remove the injector mounting bracket 4 without damaging the injectors 5.
5. Remove injectors 5 from the mounting bracket.
Installation
6. Installation is carried out in the reverse order of removal. Replace seals 6. Check injectors for leaks.