Contents: Removal ↡ Installation ↡
Removal
1. Remove the generator 1 (see figure 3.47).
Figure 3.47. Valve for checking the amount of air supplied:
1. Generator,
2. Clamp,
3. Check valve,
4. Vacuum tube,
5. Bolt,
6. Intake manifold,
7. Compaction.
2. Disconnect the tube from the test valve 3. Replace the clamp 2.
3. Disconnect the vacuum tube 4.
4. Unscrew bolts 5 securing test valve 3.
5. Remove the test valve 3. Replace the seal 7.
Installation
6. Installation is carried out in the reverse order of removal.