Contents: Removal ↡ Installation ↡
Removal
1. Remove tip 1 from oxygen sensor 2 (see figure 3.42). Loosen the lock nuts securing the oxygen sensor 2.
Figure 3.42. Lambda probe (oxygen sensor):
1. Tip,
2. Oxygen sensor,
3. Clamps,
4. Wiring,
5. Exhaust pipe.
2. Remove clamps 3 securing wiring 4.
3. Unscrew the oxygen sensor 2 from the outlet pipe 5.
4. Remove oxygen sensor 2 together with wiring 4.
Installation
5. Installation is carried out in the reverse order of removal.