Installation details of the cabin air temperature sensor intake fan assembly (with appropriate equipment)
1. The installation details of the cabin air temperature sensor intake fan assembly are shown in the illustration, to which all references in the text refer.
2. Remove the ETC control module.
3. Release the ETC control module from the support bracket (1) and disconnect the electrical wiring connector (X18) of the interior lighting/rear combination lights.
4. Unscrew the mounting bolts (2).
5. Lower the support bracket (1) down and move it to the side.
6. Disconnect the hose (3) from the suction fan assembly (M9).
7. Release the retainer (5) of the suction fan connector on the instrument panel bracket.
8. Disconnect the electrical wiring from the cabin air temperature sensor.
9. Unscrew the mounting bolts (4) and remove the intake fan assembly (M9).
10. Installation is carried out in reverse order.