Details of installation of the temperature sensor of the evaporator A/C
1 - Evaporator
B10 / 6 - Evaporator temperature sensor
Attention! All sealing elements must be replaced without fail.
1. Installation details of the A/C evaporator are shown in the illustration, to which all references in the text refer.
2. Remove the evaporator cover (see Section Removal of a casing of the evaporator K/V).
3. Remove the expansion valve (see Section Removal and installation of the expansion valve).
4. Disassemble the casing and remove the evaporator from it (1).
5. If necessary, remove the evaporator temperature sensor (B10/6) (see Section Removal and installation of the evaporator temperature sensor).
6. Installation is carried out in the reverse order - refueling of the air conditioning system must be carried out in a car service workshop.