Contents: Removal ↡ Installation ↡
Removal
1. Remove the heater.
2. Remove the clamps 1 (see figure 10.10).
Figure 10.10. Air conditioner evaporator:
1. Fixators,
2. Heater,
3. Evaporator,
4, 5. Fixators.
3. Remove the temperature sensor on the evaporator.
4. Remove the heater cover 2.
5. Remove evaporator 3 from the bottom of the heater.
Installation
6. Installation is carried out in the reverse order of removal. Replace retainer 5 and make sure it is installed correctly.