Removing
1. Disconnect the wire terminal from the negative pole of the battery «masses» (-), by turning off the ignition first.
Attention! When the battery is disconnected from the radio, the security code is deleted, as well as all automatic settings on the radio. If the code is unknown or not written down, the only way to put the radio into operation is with the assistance of a workshop or the manufacturer of the radio. Therefore, first make sure that the code is known.
2. Remove the plug from the right side of the front bumper (see illustration).
3. Disconnect the plug from the sensor (see arrow in illustration).
4. Carefully bend the clamp on the sensor seat with a screwdriver, release the sensor and remove it (see arrow in illustration 34.3).
Installation
5. Place the sensor in the mounting location and connect the plug.
6. Close the opening on the front bumper with a plug.