Contents: Removal ↡ Installation ↡
Removal
1. Remove the ignition coil 1 (see figure 3.45).
Figure 3.45. Exhaust gas recirculation (EGR) valve:
1. Ignition coil,
2. Wiring connector,
3. Circulation pump,
4. Bracket,
5. Exhaust gas recirculation pipe,
6. Exhaust gas recirculation valve,
7. Bolt.
2. Disconnect wiring connector 2 from circulation pump 3.
3. Remove circulation pump 3 from bracket 4.
4. Remove bracket 4.
5. Unscrew the exhaust gas recirculation pipe 5 from the exhaust manifold.
6. Unscrew bolts 7 securing the exhaust gas recirculation valve 6.
7. Remove the EGR valve 6. Replace the gasket.
Installation
8. Installation is carried out in the reverse order of removal.