Contents: Removal ↡ Installation ↡
Removal
1. Remove the service cover.
2. Remove cover 1 from the intake manifold (figure 3.37).
3. Disconnect wiring connector 2 from combination sensor 3.
4. Unscrew the combination sensor 3.
Installation
5. Installation is carried out in the reverse order of removal.
Figure 3.37. Combined compressed air temperature/pressure sensor (engines 904.904/908, starting with number 040 488, and engines 904.923/936): 1 - Lid; 2 - Wiring connector; 3 - Combined compressed air temperature/pressure sensor; 4 - Bolt.