Contents: Removal ↡ Installation ↡
Removal
1. Turn off the ignition and disconnect the negative cable from the battery.
2. Remove the air filter and intake pipe.
3. Remove bracket 13 for fastening the compressed air supply tube (figure 3.39).
4. Remove the generator drive belt 3.
5. Disconnect wires 9 from generator G2.
6. Disconnect oil filler pipe 1 from bracket 5. Do not disconnect the oil filler pipe from the pan.
Article was borrowed from the website (mercedesman.ru)
7. Unscrew bolt 2 securing the bracket.
8. Lift the generator G2 up together with the bracket 7 and remove them.
9. Disconnect the generator G2 from the bracket 7.
Installation
10. Installation is carried out in the reverse order of removal.
Figure 3.39. Generator: 1 - Oil filler tube; 2, 4, 6, 10, 14, 15 - Bolts; 3 - Generator drive belt; 5, 7, 13 - Brackets; 8, 11 - Nuts; 9 - Wires; 12 - Bushings.