The parking brake cables must be adjusted in the following order:
Pic. 296. Parking brake equalizer
- unscrew the four bolts shown by the arrows in fig. 296;
Pic. 297. Adjusting the parking brake cables
- according to fig. 297 insert the hexagon between the equalizer and the front cable. By turning the key, move the equalizer back in the direction of the arrow until the cables are slightly loosened;
- in this position, tighten the screws shown in fig. 296 bolts and take out the hexagon;
- raise the parking brake lever in the cab by 2 teeth;
- loosen the fixing bolt in the center of the adjusting eccentric;
Pic. 298. Rearrangement of the eccentric mechanism from the bottom side of the equalizer
- install the socket on the bolt shown in fig. 298 and tighten it with a torque of 15 Nm. Tighten the fixing bolt of the eccentric mechanism;
- raise the parking brake lever and check the rear wheel lock.