1 - Temperature control knob on the left side.
2 - Temperature control knob on the right side.
3 - Switch for the amount of air flow.
4 - Air distribution switch (12 provisions).
5 - Handle for smooth adjustment of the amount of fresh air supplied to the passenger compartment.
6 - Movable nozzles for supplying fresh air to the car interior.
7 - Knob for adjusting the amount of air supplied to the car interior by the left or right nozzle of the ventilation system. Turn the knob up to open the nozzle.
8 - Movable nozzles for supplying air to the car interior.
Fresh air is supplied to the car interior through openings located in front of the car windshield, and air is removed from the car interior with the windows closed through the ventilation openings.
9 - Air conditioning control buttons.
The and buttons are not pressed - the cooling mode is normal.
To turn on the mode, you must press the button, while the control lamp on the pressed button will light up.
To turn off, press the pressed button again, and the control lamp will go out.
Long work.
Pressing the button reduces the air humidity inside the car. At the same time, fogging of glasses is quickly eliminated.
Normal mode.
When you press the button, both heated and cooled air can be supplied to the car interior. If the temperature inside the vehicle is high, only the air conditioner operates.
To set the recommended temperature of 22°C, both temperature control knobs must be set to the desired position.
Directions
If the temperature in the vehicle interior is not adjustable, set the temperature control knobs to the MIN or MAX position.
MIN - heating off.
MAX - heating is on.
Economy mode.
Economy mode corresponds to normal operation, but does not cool the air (fuel economy).
Recycling.
Directions
In normal cooling mode, the signal light in the button lights up and does not light up in the button. If the signal light in the button lights up, the cooling mode is turned off.
The air conditioning system operates only when the engine is running. As the engine speed increases, the air conditioning compressor also increases speed and increases cooling.
When the air conditioner is running, set the air flow switch 3 to position at least 1.
To increase the cooling intensity, set the air flow switch to a higher level. Clear the air intake grille in front of the windshield from snow. Do not block the air vents located in front of the rear window.
Condensed water may appear on the underside of the vehicle when the air conditioner is operating.
When you turn on the air conditioner, the heating of the car interior is automatically regulated. The temperature in the vehicle interior is maintained at the level set by the temperature control knobs 1 and 2.
The distribution of air in the passenger compartment can be carried out by turning the knob of the air distributor 4, and changing the direction of the air flow from nozzles 6 and 8. Knobs 5 and 7 change the amount of air flow. From the central nozzles 6 only fresh, unheated air enters.
Fast air cooling
Set the temperature adjustment knobs 1 and 2 to a position corresponding to a temperature not higher than 22°C.
Press the buttons and .
Turn the air flow rate switch 3 all the way to the right.
Set the air distribution switch 4 to symbol 7.
Turn knobs 5 and 7 up to the stop.
Fully close the side windows and sunroof.
Fogging on the outside of the windshield
In wet weather, the windshield may fog up on the outside. To eliminate fogging, turn the air distribution knob 4 to such a position that the windshield is blown with cool air.