Contents: Removal ↡ Installation ↡
Removal
1. Remove the turbocharger compressed air supply pipe 2 and bracket 4 (see figure 4.9).
Figure 4.9. Cylinder head cover:
1. Air intake pipe (engines 601.942),
2. Compressed air supply pipe from turbocharging,
3. Connecting pipe,
4. Bracket,
5. Mixing chamber,
6. Oil filler neck,
7. Crankcase ventilation tube,
8. Bolt,
9. Cylinder head cover,
10. Gasket.
2. Remove the mixing chamber 5.
3. Remove the oil filler neck 6.
4. Disconnect the crankcase ventilation tube 7.
Article based on data from the website MercedesMan.ru
5. Remove cylinder head cover 9 together with gasket 10. Check gasket 10 and replace it if necessary. Wipe the sealing surfaces.
Installation
6. Installation is carried out in the reverse order of removal. Check that gasket 10 is installed correctly.