Removal
1. Remove the drive disc 1 (see figure 3.25).
Figure 3.25. Replacing the rear crankshaft oil seal:
1. Leading disk,
2. Rear oil seal,
3. Crankshaft.
2. Remove the rear oil seal 2.
Installation
3. Insert the guide sleeve into the crankshaft 3.
4. Install seal 2 into the guide sleeve. Lubricate the seal with oil.
5. Press the oil seal in until it stops using the thrust sleeve.
6. Remove the thrust and guide bushings.
7. Install drive disk 1.
Examination
8. Check for leaks.
Read more on the website (MercedesMan.ru)