A-Class C-Class E-Class G-Class M-Class S-Class Others

Sprinter (1995-2000, diesel) Vito 1 (1996-2003) Vito 2 (2003-2014, diesel) Vario 814D (1996-2003, diesel)

Flywheel / drive disk (Mercedes-Benz Vito W638)

0

Contents: Removal ↡ Installation ↡

Removal

1. Remove the automatic transmission.

2. Unscrew bolts 1 securing drive disk 2 to crankshaft 3 (see figure 3.26).

Figure 3.26. Flywheel/drive disk:

Figure 3.26. Flywheel/drive disk:
1. Bolt,
2. Leading disk,
3. Crankshaft,
4. Internal disk,
5. Outer disk.

3. Remove drive disk 2 from crankshaft 3.

Installation

4. Installation is carried out in the reverse order of removal. Replace bolts 1.

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The article has been verified: Lukyanov Nikita Ilyich

Share with friends:

◀ Previous

Mercedes Vito 1 / Engine repair

Next ▶

Replacing the rear crankshaft oil seal
Replacing the front crankshaft oil seal
Crankshaft Groove Pulley
Replacing valve seals
Valves — removal and installation

Tightening torques of engine components and parts 104.900

More similar articles for repairing other models

☛ Clutch drive — bleeding air and replacing fluid in the hydraulic drive Mercedes W168 (1997-2004)
☛ Flywheel/Drive Plate — Removal, Inspection and Installation Mercedes 190 (W201) (1982-1993)
☛ Removal the flywheel (drive disk) Mercedes W123 (1976-1985)
☛ Checking the condition of multi-rib belts for auxiliary drive units Mercedes W463 (1999-2019)
☛ Removal and installation the flywheel/drive disc Mercedes W163 (1997-2005)
☛ Flywheel or drive discs (automatic transmission) Mercedes W116 (1972-1980, petrol)

Link in different formats to this article

TEXTHTMLBB Code

Comments and feedback from visitors

No comments yet

Vito 1 (1996-2003)

We only use cookies without which some of the site's features may not be available.