Contents: Removal ↡ Installation ↡
Removal
1. Remove the cylinder head 1 (see figure 3.21).
Figure 3.21. Valves:
1. Cylinder head,
2. Camshafts,
3. Hydraulic compensator,
4. Valve spring,
5. Valves,
6. Rusks,
7. Spring plate,
8. Valve seal.
2. Remove camshafts 2.
3. Remove hydraulic lifters 3.
4. Compress the valve springs 4 using a special tool. Don't mix up the springs.
5. Remove the valve crackers 6.
6. Carefully release the valve springs 4.
7. Remove plates 7 with springs 4.
8. Remove valves 5.
Installation
9. Installation is carried out in the reverse order of removal. Replace seals 8 only after installing valves 5.