Contents: Removal ↡ Installation ↡
Note: Alternatively, the rubber working elements of the brushes can be replaced individually - it would be reasonable to entrust this work to car service specialists.
Removal
Attention! Before you start replacing the brushes, remove the key from the ignition switch!
1. Move the wiper arm away from the glass surface and turn the blade to a transverse position.
2. Press the locking tab and release the brush lock from the hook at the end of the lever
1 - Locking tongue
2 - Brush
3 - Hook on the end of the wiper arm (leash)
4 - Castle
Installation
1. Insert the brush lock into the hook at the end of the lever until the locking tab snaps into place. Check that the brush is securely locked.
