Contents: Removal ↡ Installation ↡
Removal
1. Unscrew the cap from the brake fluid reservoir.
2. Remove the liquid from the tank.
3. Disconnect tubes 9 from reservoir 3 to the master brake cylinder (see figure 9.1).
Figure 9.1. Master brake cylinder:
1. Vacuum amplifier,
2. Twin master cylinder,
3. Brake fluid reservoir,
4. Gasket,
5. Brake fluid level sensor,
6. Air intake,
7. Brake pipe,
8. Nuts,
9. Pipe to the main brake cylinder.
4. Unscrew the brake pipes from the dual master cylinder 2.
[Article text obtained from the website: mercedesman]
5. Unscrew nut 8.
6. Remove the brake master cylinder 2.
Installation
7. Installation is carried out in the reverse order of removal. Bleed the brake system. Check the vacuum booster. Check the brake pipes for leaks.
- Brake fluid volume (with diagonal arrangement of brake circuits): 0.4 l;
- with ABS/ABD or ABS/ETS: 0.8 l.