2. Loosen the nut (1) attaching the tie rod end to the steering knuckle.
3. Loosen locknut (4), holding the tie rod from rotating (5).
4. Remove the cone pin (2) tie rod end from the hole in the steering knuckle (3).
VN 1.025
1. Nut
2. Tie rod end ball joint
3. Knuckle
4. Lock nut
5. Tie rod
When installing, tighten the nut (1) according to the scheme: 50 Nm + 60.
7. Check up and adjust a convergence of forward wheels.