Contents: Removal ↡ Installation ↡
Removal
1. Disconnect the negative cable from the battery.
2. Remove cover 3 from preheating relay D2 (see figure 4.73).
Figure 4.73. Pre-heating relay:
1. Nut (chain 30),
2. Nut,
3. Lid,
D2. Pre-heating relay,
D2.1, D2.2. Wiring connectors.
3. Disconnect connectors D2.1 and D2.2.
4. Unscrew nut 1 and disconnect chain wire 30.
5. Unscrew nut 2 and remove preheating relay D2.
Installation
6. Installation is carried out in the reverse order of removal.
[Material created based on the website: www.MercedesMan.ru]