Contents: Removal ↡ Installation ↡
Removal
1. Remove the double cross beam.
2. Remove the protective cover 7 of the tray 3 (figure 3.23a).
3. Drain the engine oil.
4. Disconnect the wiring connector 8 of the oil level sensor B14.
[Text republished from the website MERCEDESMAN.ru]
Figure 3.23a. Pallet (engines up to number 049131): 1 - Oil injection line; 2 - Gasket; 3 - Pallet; 4 - Bolt; 5 - Sealing ring; 6 - Drain plug; 7 - Protective cover; 8 - Oil level sensor wiring connector
5. Unscrew the wiring connector 8 of the oil level sensor B 14 from the MR/PLD control unit and disconnect it (figure 3.23b).
6. Disconnect the oil pressure line 1 from the pan 3. Check the condition of the clamp.
7. Unscrew bolts 4 and remove pan 3. Wipe the contact surfaces of the cylinder block. Replace gasket 2 and sealing ring 5.
Installation
8. Installation is carried out in the reverse order of removal.
Figure 3.23b. Pallet (engines starting from number 049132): 1 - Oil injection line; 2 - Gasket; 3 - Pallet; 4 - Bolt; 5 - Sealing ring; 6 - Drain plug; 8 - Oil level sensor wiring connector; B14 - Oil level sensor.