Contents: Removal ↡ Installation ↡
Removal
1. Remove cover 1 (figure 2.5).
2. Remove the air filter.
3. Remove the compressed air supply tube 7.
4. Remove the corrugated tube 2 of the exhaust gas recirculation.
5. Remove the oil filler pipe 6
6. Disconnect the crankcase ventilation tube from the cylinder head cover.
7. Unscrew the 3 bolts securing the cylinder head cover.
8. Remove cover 4 together with gasket 5. Check the gasket for damage and replace it if necessary.
Installation
9. Installation is carried out in the reverse order of removal.
Figure 2.5. Cylinder head cover: 1 - Lid; 2 - Corrugated tube; 3 - Bolt; 4 - Cylinder head cover; 5 - Gasket; 6 - Oil filler tube; 7 - Compressed air supply pipe; 8 - Inlet pipe.