All-wheel drive versions of the vehicle are possible. In this case, a transfer case, a longitudinal shaft of the front drive, a front drive gearbox with an axial differential and front wheel drive shafts are additionally installed on the vehicle.
The figure shows the transmission of a four-wheel drive vehicle. Gearbox not shown.
VN 4.001: 1. Transfer case (only for all-wheel drive); 2. Front longitudinal drive shaft (only for all-wheel drive); 3. Front drive gearbox with axial differential (only for all-wheel drive); 4. Front wheel drive shafts (only for all-wheel drive); 5. Three-link cardan shaft; 6. Rear axle final drive gearbox; 7. Rear wheel drive shafts
Gear ratios of gearboxes
| Broadcast | Gear ratios of the NSG 250 manual transmission installed on vehicles with the MS1 equipment code (diesel engine OM646, 65 kW (88 hp) at 3800 rpm) | Gear ratios of the NSG 370 manual transmission installed on vehicles with the MS2 equipment code (diesel engine OM 646.80 kW (109 hp) at 3800 rpm) or MS3 (diesel engine 646.110 kW (136 hp) at 3800 rpm) |
| 1 | 4,988 | 5,014 |
| 2 | 2,816 | 2,831 |
| 3 | 1,780 | 1,789 |
| 4 | 1,249 | 1.256 |
| 5 | 1,000 | 1,000 |
| 6 | 0,823 | 0,797 |
| R | 4,544 | 4,569 |
Note: the G40 equipment code corresponds to the use of automatic transmission.
SG - manual gearbox.
250 - Torque transmitted to the gearbox.
6.058 - Ratio of low to high gear ratios.
Gearbox models and their designations
| Gearbox model (assembly code) | Gearbox designation |
| 716.637 (GD0) | SG-S250/6.058 |
| 716.652 (GD1) | SG-S370/6.29 |