VN 2.132
1. Exhaust manifold
2. Gasket connecting the exhaust manifold to the cylinder head
3. Exhaust manifold mounting nut M8
Exhaust system for the OM646 engine family equipped with a particulate filter
VN 2.133
1. Front catalytic converter
2. Diesel particulate filter clamp 60 mm
3. Diesel particulate filter
4. Feed line
5. Feed line
6. Feed line
7. Bracket
8. Central part of the exhaust system
9. Front protective plate
10. Pressure sensor bracket
11. Nut for fastening the feed tube to the bracket M6
12. Nut for fastening the bracket to the side member M6
13. Pressure sensor
14. Nut for fastening the pressure sensor to the bracket M6
15. Feed tube clamp 12.5-13.5/8 mm
16. Feed tube connector
17. Feed tube clamp 12-18x9 mm
18. Tube connecting the particulate filter and the pressure sensor-switch
19. Feed tube clamp 11.5 mm
20. Pendant ring
21. Retainer
22. Clamp connecting the inlet pipe to the turbocharger
23. M8x40 clamp screw
24. Bracket attached to the right side member
25. Bracket attached to the left side member
26. Nut for fastening the bracket attached to the side member
27. Screw for fastening the bracket, attached to the side member M6x16 mm
Exhaust system for the OM646 engine family not equipped with a particulate filter
VN 2.134
1. Front part of the exhaust system
2. Front part of the exhaust system
3. Central part of the exhaust system
4. Rear part of the exhaust system
5. Rear part of the exhaust system
6. Clamp for fastening the rear part to the central part
7. Front sealing ring
8. Front part mounting bolt
9. Oxygen sensor
10. Heat shield
11. Bracket
12. Clamp 12-18x9 mm
13. Heat shield
14. Pendant ring
15. Spring retainer for turbocharger connection to inlet pipe
16. Bracket for fastening the system to the transmission flange
17. Nut M8
18. Band clamp 4.6x190 mm
19. Band clamp 4.7x202 mm
20. Band clamp 4.6x190 mm