Contents: Removal ↡ Installation ↡
Removal
1. Remove the tray 5 (see figure 2.81).
Figure 2.81. Oil pump:
1. Oil pump,
2. Keyway bushings,
3. Pump mounting bracket,
4. Oil pump drive chain,
5. Pallet,
6. Toothed pulley of the oil pump.
2. Disconnect the pump mounting bracket from the pump.
3. Loosen the pump mounting bolts, lower the pump down and remove the pump drive chain from the toothed pulley.
Installation
4. Installation is carried out in the reverse order of removal. Wipe the pump mounting bracket. Before installing the pump, fill it with oil so that it can start working immediately after starting the engine.
(Original article is on the portal mercedesman)