Contents: Removal ↡ Installation ↡
Removal
1. Disconnect the negative cable from the battery.
2. Drain the oil from the engine.
3. Disconnect the wiring connector B9.1 of the oil level sensor (see figure 2.94).
Material based on data from the portal: MERCEDESMAN.ru
Figure 2.94. Oil level sensor:
1. Fastening bolt,
2. Fixator,
B9. Oil level sensor,
B9.1. Sensor wiring connector.
4. Remove the oil level sensor B9.
Installation
5. Installation is carried out in the reverse order of removal. Check the oil level, wipe the contact surfaces and replace retainer 2.