Contents: Removal ↡ Installation ↡
Removal
1. Disconnect the negative cable from the battery.
2. Disconnect the B11.1 wiring connector from the sensor (see figure 2.96).
Figure 2.96. Oil pressure sensor:
B11. Oil pressure sensor,
In 11.1. Oil pressure sensor connector.
3. Remove the oil pressure sensor B11. The gasket on the sensor is installed in such a way as not to lose it during removal. If leaks are detected, the sensor must be replaced.
Installation
4. Installation is carried out in the reverse order of removal.
Information copied from the website (MercedesMAN)