Pic. 1.32. Drain 2 and filler 1 automatic transmission plugs.
2. Unscrew the filler and drain plugs and drain the oil.
3. Wipe the surface adjacent to the supply 3 and drain 6 oil tubes (on models with additional oil cooler) (see fig. 1.33).
Pic. 1.33. Drain 6 and pressure 3 tubes of an automatic transmission.
4. Unscrew the inlet 3 and drain 6 tubes from the oil cooler.
5. Tighten the new drain plug to 30 Nm.
6. Screw inlet 3 and drain 6 tubes to the oil cooler.
7. Fill in 3 liters of oil to start.
8. Start the engine.
9. Alternately move the gear selector lever to all positions.
10. Add oil through the open filler hole to the low level while the engine is running.
11. Warm up the oil to 40°C with the engine idling.
12. Tighten the new filler plug to 60 Nm.