Contents: Removal ↡ Installation ↡
Removal
1. Remove the wheel.
2. Remove the lower engine guard.
3. Remove flanges 2 and rubber supports 3 securing the stabilizer to the supporting surface (see figure 7.2).
Figure 7.2. Anti-roll bar:
1. Anti-roll bar,
2. Flanges,
3. Rubber support,
4. Bolts M8x20,
5. Racks,
6. Nuts M10.
4. Unscrew nuts 6 securing strut 5 to stabilizer 1.
5. Remove the front part of the exhaust system.
6. Remove stabilizer 1.
Installation
7. Installation is carried out in the reverse order of removal.